# Allied-Telesis ## X510 bootloader versionup battle ``` awplus#show system Stack System Status Thu Jun 17 02:35:41 2021 Stack member 1 Board ID Bay Board Name Rev Serial number -------------------------------------------------------------------------------- Base 369 x510-28GTX B-0 XXXXXXXXX -------------------------------------------------------------------------------- RAM: Total: 494844 kB Free: 375548 kB Flash: 63.0MB Used: 25.3MB Available: 37.7MB -------------------------------------------------------------------------------- Environment Status : ***Fault*** Uptime : 0 days 00:31:12 Bootloader version : 2.0.14 Current software : x510-5.4.4-3.10.rel Software version : 5.4.4-3.10 Build date : Mon Jul 6 07:25:52 UTC 2015 Current boot config: flash:/default.cfg (file exists) System Name awplus System Contact System Location ``` `Bootloader version : 2.0.14` なので `x510-5.4.8-2.9a.rel` をあてる． - 空き容量チェック ``` awplus#show file systems Size(b) Free(b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail ------------------------------------------------------------------- 63.0M 32.0M flash rw flash: static local Y - - system rw system: virtual local - 10.0M 9.9M debug rw debug: static local Y 499.0K 464.0K nvs rw nvs: static local Y - - usbstick rw usb: dynamic local N - - fserver rw fserver: dynamic network N - - tftp rw tftp: - network - - - scp rw scp: - network - - - sftp ro sftp: - network - - - http ro http: - network - - - rsync rw rsync: - network - ``` - 転送 ``` % scp x510-5.4.8-2.9a.rel manager@10.0.0.1:x510-5.4.8-2.9a.rel Password: x510-5.4.8-2.9a.rel 100% 25MB 389.0KB/s 01:06 ``` ``` awplus#show file sys Size(b) Free(b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail ------------------------------------------------------------------- 63.0M 12.0M flash rw flash: static local Y - - system rw system: virtual local - 10.0M 9.9M debug rw debug: static local Y 499.0K 464.0K nvs rw nvs: static local Y - - usbstick rw usb: dynamic local N - - fserver rw fserver: dynamic network N - - tftp rw tftp: - network - - - scp rw scp: - network - - - sftp ro sftp: - network - - - http ro http: - network - - - rsync rw rsync: - network - awplus#dir 26549894 -rw- Jun 17 2021 02:51:23 x510-5.4.8-2.9a.rel 861 -rw- Jun 17 2021 02:37:41 default.cfg 24319922 -rw- Nov 19 2015 08:53:23 x510-5.4.4-3.10.rel ``` 転送ok - verup ``` awplus#show boot Boot configuration -------------------------------------------------------------------------------- Current software : x510-5.4.4-3.10.rel Current boot image : flash:/x510-5.4.4-3.10.rel (file exists) Backup boot image : Not set Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file exists) Backup boot config: Not set Autoboot status : disabled awplus#conf t Enter configuration commands, one per line. End with CNTL/Z. awplus(config)#boot system x510-5.4.8-2.9a.rel awplus(config)#boot system backup x510-5.4.4-3.10.rel awplus(config)#end awplus# awplus#show boot Boot configuration -------------------------------------------------------------------------------- Current software : x510-5.4.4-3.10.rel Current boot image : flash:/x510-5.4.8-2.9a.rel (file exists) Backup boot image : flash:/x510-5.4.4-3.10.rel (file exists) Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file exists) Backup boot config: Not set Autoboot status : disabled awplus#reboot reboot system? (y/n): y ``` - 起動シーケンス ``` Machine Restart Bootloader 2.0.14 loaded Press for the Boot Menu Reading filesystem... Loading flash:x510-5.4.8-2.9a.rel... Verifying release... OK Booting... Starting base/first... [ OK ] Mounting virtual filesystems... [ OK ] ______________ ____ /\ \ / /______\ / \ \_ __/ /| ______ | / \ | | / | ______ | / \ \ / / \ ____ / /______/\____\ \/ /____________/ Allied Telesis Inc. AlliedWare Plus (TM) v5.4.8 Current release filename: x510-5.4.8-2.9a.rel Built: Wed Jun 19 12:08:33 UTC 2019 Mounting static filesystems... [ OK ] Checking flash filesystem... [ OK ] Mounting flash filesystem... [ OK ] Checking NVS filesystem... [ OK ] Mounting NVS filesystem... [ OK ] Verifying bootloader... [FAILED] +----------------------------------------------------+ | | Expected bootloader version 2.0.36, found 2.0.14 |----+ +----------------------------------------------------+ Updating bootloader... [ OK ] cat: can't open '/var/lib/stack/is_stacked': No such file or directory sh: 1: unknown operand fastboot: rebooted by ghost: Special firmware Flushing file system buffers...reboot: Restarting system Unmounting any remaining filesystems... Machine Restart Please stand by while rebooting the system... Bootloader 2.0.36 loaded Press for the Boot Menu Reading filesystem... Loading flash:x510-5.4.4-3.10.rel... Verifying release... OK Booting... Starting base/first... [ OK ] Mounting virtual filesystems... [ OK ] ______________ ____ /\ \ / /______\ / \ \_ __/ /| ______ | / \ | | / | ______ | / \ \ / / \ ____ / /______/\____\ \/ /____________/ Allied Telesis Inc. AlliedWare Plus (TM) v5.4.4 Current release filename:x510-5.4.4-3.10.rel Original release filename: x510-5.4.4-3.10.rel Built: Mon Jul 6 07:25:51 UTC 2015 Mounting static filesystems... [ OK ] Checking flash filesystem... [ OK ] ... ``` bootloaderがverupされた． ``` awplus#show system | inc Boot Bootloader version : 2.0.36 awplus#show boot Boot configuration -------------------------------------------------------------------------------- Current software : x510-5.4.4-3.10.rel Current boot image : flash:/x510-5.4.4-3.10.rel (file exists) Backup boot image : Not set Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file exists) Backup boot config: Not set Autoboot status : disabled Boot Security Level: none awplus#dir 861 -rw- Jun 17 2021 02:55:45 default.cfg 26549894 -rw- Jun 17 2021 02:51:23 x510-5.4.8-2.9a.rel 24319922 -rw- Nov 19 2015 08:53:23 x510-5.4.4-3.10.rel ``` このfirmはboot firmupのためのものなので通常の起動で使うべきfirmではない．したがって勝手にbackupのものがprimary imageになるようになっている． ## つづいてfirm verup battle ``` awplus#show system Stack System Status Thu Jun 17 03:07:38 2021 Stack member 1 Board ID Bay Board Name Rev Serial number -------------------------------------------------------------------------------- Base 369 x510-28GTX B-0 XXXXXXXXX -------------------------------------------------------------------------------- RAM: Total: 494844 kB Free: 373972 kB Flash: 63.0MB Used: 35.6MB Available: 27.4MB -------------------------------------------------------------------------------- Environment Status : ***Fault*** Uptime : 0 days 00:10:19 Bootloader version : 2.0.36 Current software : x510-5.4.4-3.10.rel Software version : 5.4.4-3.10 Build date : Mon Jul 6 07:25:52 UTC 2015 Current boot config: flash:/default.cfg (file exists) System Name awplus System Contact System Location awplus#show file system Size(b) Free(b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail ------------------------------------------------------------------- 63.0M 37.7M flash rw flash: static local Y - - system rw system: virtual local - 10.0M 9.9M debug rw debug: static local Y 499.0K 464.0K nvs rw nvs: static local Y - - usbstick rw usb: dynamic local N - - fserver rw fserver: dynamic network N - - tftp rw tftp: - network - - - scp rw scp: - network - - - sftp ro sftp: - network - - - http ro http: - network - - - rsync rw rsync: - network - awplus#dir 861 -rw- Jun 17 2021 02:55:45 default.cfg 24319922 -rw- Nov 19 2015 08:53:23 x510-5.4.4-3.10.rel ``` - firm転送 ``` % scp x510-5.5.1-0.1.rel manager@10.0.0.1:x510-5.5.1-0.1.rel Password: x510-5.5.1-0.1.rel 100% 25MB 564.5KB/s 00:46 ``` - verup ``` awplus#dir 26639992 -rw- Jun 17 2021 16:08:05 x510-5.5.1-0.1.rel 861 -rw- Jun 17 2021 02:55:45 default.cfg 24319922 -rw- Nov 19 2015 08:53:23 x510-5.4.4-3.10.rel awplus(config)#do show boot Boot configuration -------------------------------------------------------------------------------- Current software : x510-5.4.4-3.10.rel Current boot image : flash:/x510-5.4.4-3.10.rel (file exists) Backup boot image : Not set Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file exists) Backup boot config: Not set Autoboot status : disabled Boot Security Level: none awplus(config)#boot system x510-5.5.1-0.1.rel awplus(config)#boot system backup x510-5.4.4-3.10.rel awplus(config)#do show boot Boot configuration -------------------------------------------------------------------------------- Current software : x510-5.4.4-3.10.rel Current boot image : flash:/x510-5.5.1-0.1.rel (file exists) Backup boot image : flash:/x510-5.4.4-3.10.rel (file exists) Default boot config: flash:/default.cfg Current boot config: flash:/default.cfg (file exists) Backup boot config: Not set Autoboot status : disabled Boot Security Level: none awplus(config)# exit awplus#reboot reboot system? (y/n): y ``` あがってくる ``` Machine Restart Bootloader 2.0.36 loaded Press for the Boot Menu Reading filesystem... Loading flash:x510-5.5.1-0.1.rel... Verifying release... OK Booting... Linux version 5.7.19-at1 (maker@maker07-build) (gcc version 8.3.0 (crosstool-NG 1.24.0), GNU ld (crosstool-NG 1.24.0) 2.32) #1 Mon Apr 12 02:18:23 UTC 2021 printk: bootconsole [early0] enabled CPU0 revision is: 00019749 (MIPS 74Kc) MIPS: machine is Allied Telesis x510/IX5/IE510/SH510 Starting base/first... [ OK ] Mounting virtual filesystems... [ OK ] ______________ ____ /\ \ / /______\ / \ \_ __/ /| ______ | / \ | | / | ______ | / \ \ / / \ ____ / /______/\____\ \/ /____________/ Allied Telesis Inc. AlliedWare Plus (TM) v5.5.1 Current release filename: x510-5.5.1-0.1.rel Built: Mon Apr 12 03:01:37 UTC 2021 Mounting static filesystems... [ OK ] Checking flash filesystem... [ OK ] Mounting flash filesystem... [ OK ] Checking NVS filesystem... [ OK ] Mounting NVS filesystem... [ OK ] ... ``` ## fan静音化 - `edit fan.sh`してeditorが開くので下記を記述．C-k,s でsave, C-cでexit． ``` awplus#show file fan.sh #!/bin/sh # avoid low speed error echo 1000 > /sys/class/hwmon/hwmon0/fan1_min # specify 0-255 for fan speed echo 64 > /sys/class/hwmon/hwmon0/pwm1_auto_point1_pwm echo 64 > /sys/class/hwmon/hwmon0/pwm1_auto_point2_pwm awplus# ``` シェルスクリプトを走らせる ``` awplus#show system env Environment Monitoring Status Overall Status: ***Fault*** Resource ID: 1 Name: RPS 1 () ID Sensor (Units) Reading Low Limit High Limit Status 1 Device Present Yes - - Ok 2 PSU Power Output Yes - - Ok Resource ID: 2 Name: RPS 2 () ID Sensor (Units) Reading Low Limit High Limit Status 1 Device Present Yes - - Ok 2 PSU Power Output No - - FAULT Resource ID: 3 Name: x510-28GTX ID Sensor (Units) Reading Low Limit High Limit Status 1 Fan: Fan 1 (Rpm) 4309 3000 - Ok 2 Voltage: 1.8V (Volts) 1.813 1.612 1.975 Ok 3 Voltage: 1.0V (Volts) 0.999 0.891 1.090 Ok 4 Voltage: 3.3V (Volts) 3.278 3.028 3.562 Ok 5 Voltage: 5.0V (Volts) 5.066 4.503 5.498 Ok 6 Voltage: 1.2V (Volts) 1.184 1.046 1.292 Ok 7 Temp: CPU (Degrees C) 51 -11 80 Ok awplus#show file fan.sh #!/bin/sh # avoid low speed error echo 1000 > /sys/class/hwmon/hwmon0/fan1_min # specify 0-255 for fan speed echo 64 > /sys/class/hwmon/hwmon0/pwm1_auto_point1_pwm echo 64 > /sys/class/hwmon/hwmon0/pwm1_auto_point2_pwm awplus# awplus#activate fan.sh awplus#show sys env Environment Monitoring Status Overall Status: ***Fault*** Resource ID: 1 Name: RPS 1 () ID Sensor (Units) Reading Low Limit High Limit Status 1 Device Present Yes - - Ok 2 PSU Power Output Yes - - Ok Resource ID: 2 Name: RPS 2 () ID Sensor (Units) Reading Low Limit High Limit Status 1 Device Present Yes - - Ok 2 PSU Power Output No - - FAULT Resource ID: 3 Name: x510-28GTX ID Sensor (Units) Reading Low Limit High Limit Status 1 Fan: Fan 1 (Rpm) 1911 1000 - Ok 2 Voltage: 1.8V (Volts) 1.813 1.612 1.975 Ok 3 Voltage: 1.0V (Volts) 0.999 0.891 1.090 Ok 4 Voltage: 3.3V (Volts) 3.278 3.028 3.562 Ok 5 Voltage: 5.0V (Volts) 5.066 4.503 5.498 Ok 6 Voltage: 1.2V (Volts) 1.184 1.046 1.292 Ok 7 Temp: CPU (Degrees C) 49 -11 80 Ok ``` ### memo ``` awplus#show file show.sh #!/bin/sh # memo set -x cat /sys/class/hwmon/hwmon0/pwm1_auto_channels_temp cat /sys/class/hwmon/hwmon0/pwm1_auto_point1_pwm cat /sys/class/hwmon/hwmon0/pwm1_auto_point2_pwm cat /sys/class/hwmon/hwmon0/pwm1_enable cat /sys/class/hwmon/hwmon0/pwm1_freq cat /sys/class/hwmon/hwmon0/pwm1 awplus#activate show.sh + cat /sys/class/hwmon/hwmon0/pwm1_auto_channels_temp 2 + cat /sys/class/hwmon/hwmon0/pwm1_auto_point1_pwm 128 + cat /sys/class/hwmon/hwmon0/pwm1_auto_point2_pwm 255 + cat /sys/class/hwmon/hwmon0/pwm1_enable 2 + cat /sys/class/hwmon/hwmon0/pwm1_freq 22500 + cat /sys/class/hwmon/hwmon0/pwm1 128 awplus# ``` ## 強制初期化 - PWがわからなくあんったときとか - [AlliedTelesis AT系機器初期化方法 | ほげほげ備忘録](http://edcv.net/network/allied-initialization/)